Rusty and Broken Bench Grinder - Restoration

Pubblicato il 10 gen 2020
visualizzazioni 463 906
283

In this video i'm restoring a rusty and broken bench grinder.

A few weeks ago i was to flea market and after few minutes in rain and bad weather i found this cool benck grinder, was all wet and dirty.
Right away i knew that i can make a nice restoration video for you.
This rusty bench grinder costed me 15 Euro($17), and the seller warned me that it does not work because it was in the rain.
This is the reason why i didn't test it before cleaning.
When i checked inside i discovered that the capacitor was exploded and both bearings were worn.
For the painting i choose to make it yellow with polished parts.
on some parts i decide to protect them with bluing metode.
This Restoration took me 5 days to complete.
I like so much this bench grinder and will be next to my other bench grinder for display on my shelf.

I hope you like my work and my video.
Subscribe for more cool videos. I'm uploading videos about old stuff restoration.

Huge Thank you to all my Patreon and Paypall Supporters!

Time and costs of this restoration:
I was working on this project for 5 days
$15 bench grinder
$8 capacitor
$20 paint and clear laquer
$9 bearings
$10 cable and plug

My Camera:
Canon G7x Mark 2 : amzn.to/2Rf47IV

TysyTube T-Shirts:
teespring.com/fr/replace-your...



If you want to help me create more cool videos you can support me on Patreon or Paypall

Instagram www.instagram/tysytube
PayPall www.paypal.me/tysytube
Patreon www.patreon.com/tysytuberestor...
Facebook
Amazon links
SandBlaster - amzn.to/2KPCXqP
Gloves - amzn.to/2ZmKbGL
Sandblaster media - amzn.to/2Zna3lL
Ring light - amzn.to/2Rflx84
Second studio light - amzn.to/2XdlIWT
Camer - amzn.to/2Rf47IV
Polishing wheel - amzn.to/2KXwV7J
Huge Lighter video - itload.info/losk/oYy5lqGOuqrEd9I/video
Cristal clear resin - amzn.to/2nTmrwx
LordsWorld - 25 Kilogrammes A1 Asilikos Universal Sand for sandblasting - amzn.to/2Qd7Syp
Condensateur de démarrage pour moteur 6µF 450V précâblé - amzn.to/35KPuml



TysyTube Restoration
Commenti  
  • TysyTube Restoration

    TysyTube Restoration

    10 mesi fa

    Thank you for watching my video! After you finish watching you should check this Yellowed Playstation PS1 here: 😎🥰 https://youtu.be/4HBr8NE17oc

    • Anthony laduca

      Anthony laduca

      11 giorni fa

      are u getting new plosh wax soon

  • charlesistheman

    charlesistheman

    14 giorni fa

    This looks amazing!

  • Andrew MacKenzie

    Andrew MacKenzie

    Mese fa

    I REALLY WANT TO GET A TYSYTUBE RESTORATION SIGN FOR MY BEDROOM WALL... JUST LIKE THE ONE YOU HAVE ON THE WALL ABOVE YOUR WORKBENCH... YOU'RE THE GOD OF RESTORATION

  • Riska Andianto

    Riska Andianto

    2 mesi fa

    Good job, Tysy. 👍
    Were are you from?
    I'm from Indonesia, nice too meet you.

  • Pumibel

    Pumibel

    3 mesi fa

    I am happy you kept this one!

  • Sir Locher

    Sir Locher

    3 mesi fa

    🦍

  • David Schulz

    David Schulz

    3 mesi fa

    “I used the bench grinder to restore the bench grinder” -restoration thanos

  • Lina

    Lina

    4 mesi fa

    Oh, sandblasting is so cool

  • Sidnei Manzutti

    Sidnei Manzutti

    4 mesi fa

    🤗 Fantastic.

  • Moslem Mohammadbagheri

    Moslem Mohammadbagheri

    4 mesi fa

    کارت درسته رفیق،عالی هستی

  • Wulfrune

    Wulfrune

    5 mesi fa

    Ahhh, but who grinds the grinding wheel?

  • myriam ham-four

    myriam ham-four

    5 mesi fa

    Do you resell the tools you re-type?

  • myriam ham-four

    myriam ham-four

    5 mesi fa

    Superbe superbe travail !!!👌👌👌👌👍👍👍👏👏👏👏👏

  • Christopher Bedford

    Christopher Bedford

    5 mesi fa

    You can see why the seller replaced it rather than trying to repair. Total cost of Tysy's parts & materials to do this refurb job: $47 (not including the actual grinder @ $15). You can buy a new light duty 150mm grinder now for between $25 and $35 - of course you don't get a work of art and it will certainly not last long (they are sold as "DIY" tools after all...) but to our 21st century throwaway society that's the way it works now. It's broken? Toss it in a landfill, buy a new one made in a Chinese sweatshop by children.

  • Richard de leeuw

    Richard de leeuw

    5 mesi fa

    Where does that ground wire come from? i guess it does not plug in into the wall socket with that plug at the end of the cable.

  • Tom Owens

    Tom Owens

    5 mesi fa

    I've just started watching this vid. Already I see a major no no. It is required that you must wear the black gloves.......or your "cool" rating will be affected.
    Other than that very well done!

  • Sasha Mirzayans

    Sasha Mirzayans

    6 mesi fa

    What a great job!

  • Killerspieler0815

    Killerspieler0815

    6 mesi fa

    Danger: A Europlug ( = without Earth) is not suitable fo this device ... install a "CEE 7/7" (USA designation: Type E+F ) that might been taken from a computer or other suitable device

  • Killerspieler0815

    Killerspieler0815

    6 mesi fa

    Grinding wheels may contain Asbestos , the Paint may contain Lead !

  • Marcos Fugiwara

    Marcos Fugiwara

    6 mesi fa

    Muito top 👏👏👏🇧🇷

  • Oliver G.

    Oliver G.

    7 mesi fa

    Love those videos - got myself an 1961 AEG bench grinder and planning to restore it. Why youre stripping off the paint when you sandblast the parts anyway? Would be intersting to know...
    Thanks and continue your great work!

  • Ali Ali1

    Ali Ali1

    7 mesi fa

    The shafte was installed out of its direction

  • Carlos Avila

    Carlos Avila

    7 mesi fa

    Awesome looking tool.
    Do you test run the motors before continuing assembling the rest of the parts?

  • Danymite hazard

    Danymite hazard

    8 mesi fa

    Looks good

  • Шамиль Казбеков

    Шамиль Казбеков

    8 mesi fa

    Я случайно попал на ваш канал и был в восторге от вашей работы и вашего отношения к старинным вещам. Ваша культура работы и терпение меня просто поражает. Вы мастер высшего класса. Жму вам руку. Спасибо за видео . Побольше бы таких интересных видеороликов. Ещё раз спасибо.

  • mediumstudio

    mediumstudio

    8 mesi fa

    ya I dig the clear bottom plate!

  • Chuck Corris

    Chuck Corris

    8 mesi fa

    Nice job overall but I like the bottom

  • Expat Moose

    Expat Moose

    8 mesi fa

    Super, colour combo stands out wonderfully
    Stay safe

  • Oyuncu Tayfa

    Oyuncu Tayfa

    8 mesi fa

    Sa

  • Edwin Jackson

    Edwin Jackson

    9 mesi fa

    3:23 I see that the Tire Extractor can be used to remove bearings as well....

  • Chris Wesney

    Chris Wesney

    9 mesi fa

    You guys have way stronger paint stripper than the USA

  • Roman Ermashov

    Roman Ermashov

    9 mesi fa

    Are you twins with my mechanics? 🙃

  • Vaild_me

    Vaild_me

    9 mesi fa

    I always thought the air gun was a paint gun haha

  • Phim Ngày Xưa

    Phim Ngày Xưa

    9 mesi fa

    Vietnam like

  • yutan15silvia

    yutan15silvia

    10 mesi fa

    I think the motor shaft is reversed.🤔

  • Willams Batista De Vasconcelos

    Willams Batista De Vasconcelos

    10 mesi fa

    Cara ficou magnífico. Você merece mais do que um dez (10). Merece muito mais... Excelente

    • Mark RS

      Mark RS

      Mese fa

      Um br

  • t0mn8r

    t0mn8r

    10 mesi fa

    Good job.

  • sc si

    sc si

    10 mesi fa

    Nice job but missed the part that there is no ground the 2 pin plug. I would have changed that to.

  • Heiki Herman

    Heiki Herman

    11 mesi fa

    you are megaamazing!

  • juan galan

    juan galan

    11 mesi fa

    Buen video!!!.
    Recuerdo que ya habia restaurado uno de esos .

  • Invisible Corpse

    Invisible Corpse

    Anno fa

    You can see his face in 14:01 minutes. Hopefully it can help you to see his face. 😉😂

  • Paul Kolodziejczak

    Paul Kolodziejczak

    Anno fa

    I love your restorations but it hurts my eyes every time I see you use your flush cutters as pliers to remove rivets. Lol 4:13

  • Connor Brockman

    Connor Brockman

    Anno fa

    Great job! I love the yellow you chose.

  • Michał Kubisz

    Michał Kubisz

    Anno fa

    Beautiful work as always.
    PS. Shouldn't the metal casing be grounded?

  • David Lafaye

    David Lafaye

    Anno fa

    3 things I love the most about watching u wrk:
    1: The sandblasting of course
    2: The finished product
    3: When u disassemble everything and have all neatly on yur table!
    Keep up the good wrk I will watch u for as long as u have a channel

  • Madmaximus

    Madmaximus

    Anno fa

    What does the cold bluing actually do

  • deepak kumar

    deepak kumar

    Anno fa

    Not so old to restore
    Pls. Restore something vintage stuff

  • Survivor

    Survivor

    Anno fa

    😍

  • TheSensor123

    TheSensor123

    Anno fa

    you should really use wire ferrules for connecting standed wire in a screw terminal....

  • Maximilian Kolbe

    Maximilian Kolbe

    Anno fa

    TYSY - could you post a link to your screw driver(s)/set? Thanks.
    Great work as always. I always wonder (because I don’t know any better), why invest the time and labor of the wire brush first THEN MC51 and finally sand blasting? Why not go directly to sandblasting and save some time and labor? Thanks.

  • Lothar Merl

    Lothar Merl

    Anno fa

    Nice Video! But place some new cardboard labels on the grinding wheels, please! They are not just for labeling. They prevent the wheels from cracking by evening out the surface.

  • Qasim Raza

    Qasim Raza

    Anno fa

    8.40 what is that liquid called

  • Qasim Raza

    Qasim Raza

    Anno fa

    Who polishes inner rotor

  • Muy Malo

    Muy Malo

    Anno fa

    good old machine, they don't make them like that anymore

  • Butacup Pucatub

    Butacup Pucatub

    Anno fa

    Magnificent!!! I love that you chose yellow paint. Thank you!

  • DON'T PANNIC

    DON'T PANNIC

    Anno fa

    wondering why is needed the wet sand after the primer, what happens you dont wet sand it ?

  • Ray Cashman

    Ray Cashman

    Anno fa

    Remarkable and amazing. What material do you apply after sandblasting to fill the pores and roughness that remains before sanding it and polishing?

  • Erin Howarth

    Erin Howarth

    Anno fa

    The happiest tool in the shop is the yellow one.

  • Deputy Wreckmeister

    Deputy Wreckmeister

    Anno fa

    13:20 Why the screwdriver moved? 😂

  • AlexWolf 90909

    AlexWolf 90909

    Anno fa

    Вал поставил не правильно,левая резьба должна быть слева,а правая справа 😉

  • Nate Barker

    Nate Barker

    Anno fa

    How long after sand blasting would rusting reoccur?

  • Fernando Queiroz Popovic

    Fernando Queiroz Popovic

    Anno fa

    Now if that ain't a cool find I don't know what is that's the 3rd grinder so far you will need a whole section just for grinding if you find some more. 👍😂👍

  • Shilo Allard

    Shilo Allard

    Anno fa

    Awesome job tysy

  • Kioto

    Kioto

    Anno fa

    another one? you had one already

  • Martin Golding

    Martin Golding

    Anno fa

    Must have loads of spare parts to do these restoration videos

  • Circus Full of Clowns

    Circus Full of Clowns

    Anno fa

    You can remove the deep scratch by carefully using the flame of a lighter.

  • jackie

    jackie

    Anno fa

    👍

  • Кристина Деккер

    Кристина Деккер

    Anno fa

    Отличная работа больше видео . ))))

  • Ghosted_YT

    Ghosted_YT

    Anno fa

    Excellent work 👌👍👌👌👌👏👏 that looks nice and clean

  • Theodore Barrett Sr.

    Theodore Barrett Sr.

    Anno fa

    👍👍👍👍👍👍

  • Jule ツ

    Jule ツ

    Anno fa

    hi man where do you find this kind of old machine to renovate

  • فرحت عباس

    فرحت عباس

    Anno fa

    Are you save from corona vires.

  • Ian Gambrill

    Ian Gambrill

    Anno fa

    Hi im new to channel and love it. You are correct to state that the grinding wheels should be replaced. Also NEVER fit grinding wheels without the paper friction pads fitted between washer and wheel. Keep up the great videos!

  • Иван Иванович Иванов

    Иван Иванович Иванов

    Anno fa

    Между наждачным кругом и крепежными шайбами нужно обязательно устанавливать картонные прокладки (в начале видео их видно, они были приклеены к наждачным кругам). Иначе при затягивании круг может лопнуть и при вращении осколки прилетят прямо в лоб. Круги имеют срок хранения и эксплуатации. Старые и тем более как видно из видео, отсыревшие круги использовать строжайше запрещено. И вообще смысл всего этого? Блестящий станок лучше полирует? Нужно было просто круги заменить и промасленной тряпкой протереть.

  • Jonescalypso

    Jonescalypso

    Anno fa

    Wow! :D What a wonderful improvement! Beautiful work!

  • Jim Oakley

    Jim Oakley

    Anno fa

    How do the rivets stay put without mushrooming them on the back side?

  • hans wurst

    hans wurst

    Anno fa

    Real men use tin, not bondo. Nice restoration, nontheless

  • 1701spacecadet

    1701spacecadet

    Anno fa

    Don't use expensive car polish on acrylic/perspex. Ordinary toothpaste will polish it just as well. It's how they remove scratches from perspex watch crystals.

  • yorm100

    yorm100

    Anno fa

    Magnifico ✨✨Bravo !

  • Peter Koperdan

    Peter Koperdan

    Anno fa

    Good restoration, but it just shows how my mechanics is on entirely different level. The views reflect that too. I would really love to know how my mechanics got to that level of skill..

    • Peter Koperdan

      Peter Koperdan

      Anno fa

      @Jack Jonas You think his job is a cnc mechanic?

  • Alfredo Floress

    Alfredo Floress

    Anno fa

    👍👍

  • DaGauntlett

    DaGauntlett

    Anno fa

    Love this one. Searching for a used cheap one myself.

  • Jesse Turner

    Jesse Turner

    Anno fa

    Dig your series of "now that I have learned stuff". The scales and the grinders show how much you've evolved.

  • Snack Satan

    Snack Satan

    Anno fa

    that big, silver claw tool at 3:21 was SO COOL!! And what a niche piece of equipment! also the clear plastic bottom was a very nice touch imho.

  • Guillermo Reche

    Guillermo Reche

    Anno fa

    Resultado, mejor que nueva. Buen trabajo

  • RhianKristen

    RhianKristen

    Anno fa

    Amazing as always, and I love the clear base. 👍

  • George Mays

    George Mays

    Anno fa

    Great job. Very enjoyable video. I love watching other people work. :-)

  • Doctor Ice

    Doctor Ice

    Anno fa

    What year is it from.l?

  • l'aspirant #7339

    l'aspirant #7339

    Anno fa

    😮😮😮😮😮

  • Pär Krantz

    Pär Krantz

    Anno fa

    Shouldn't that have an earth connection? i.e a ground wire as well?

  • parapluie sauvage

    parapluie sauvage

    Anno fa

    C tres impressionnant, mais je n'ai pas compris l'intérêt de polir la tige au milieu du moteur

  • elrond12eleven

    elrond12eleven

    Anno fa

    Always use cardboard pads between steeel washers and abrasive disk. They will dispence forces and prevent disk cracking and flewing into your head.

    • TysyTube Restoration

      TysyTube Restoration

      Anno fa

      check my last video for that

  • CyberPirate2008

    CyberPirate2008

    Anno fa

    Hammer tone/Hammerrite paint would have looked cooler on it IMO.

  • Raiden16

    Raiden16

    Anno fa

    TysyTube: I use the bench grinder to repair the bench grinder

  • Jake Schroeder

    Jake Schroeder

    Anno fa

    Why not just use the same plexiglass you used for the bottom to make a new shield for the one that was scratched?

  • Majdi bidiA

    Majdi bidiA

    Anno fa

    Restoring these machines is very impressive

  • peebee143

    peebee143

    Anno fa

    I think you assembled the shaft in the wrong way round. The left-hand thread should be at the left end of the machine when you are facing the front of it.

  • Cav Scout

    Cav Scout

    Anno fa

    The clear underside was a great idea!

  • Thomas M.

    Thomas M.

    Anno fa

    Unpopular opinion: I find sand blasting to be very unsatisfying. Just seems like it’s not so much restoring anymore as much as just taking apart, sand blast, then repainting. Not many parts that need to be hammered back to shape and hand sanding anymore (general examples) There is nothing wrong with what tysy is doing but there really isn’t anything different with each upload. They are all just the same video. And I mean I don’t blame him since the algorithm would destroy his channel if he doesn’t upload on a regular basis. Just seems like a bummer

  • S Christy

    S Christy

    Anno fa

    LOVE(!!!!) the clear bottom and the Yellow, Chrome,and Black..... ROCKS!!!!!!. Have been buzzy and have not had time to watch your show. Always great shows.